Price: £130
SKU: KHT770
If you model in the United Kingdom – This kit is great for those “northern powerhouse” pacific steamers. LNER A3’s and A4s that ran out of Doncaster, or maybe a LMS Princess from Crewe works, this turntable kit will tick the box for you.
If you model in Germany, and need to turn your beautiful O scale German DR class 50 2-10-0 then this 23m Drehsheibe is just for you! AUG 2026: SADLY I CAN NO LONGER SHIP TO EU. But I can ship to UK addresses.
The turntable design picks up generic features found across the UK and Germany, rather than focusing on a particular prototype. If you love rivets – it has none to count! This kit is for modellers who want something that will not look out of place and is simple to put together. Demigod modellers can use it as a starting point and add extra features as desired.
Assembly is straightforward with step by step instructions with many photos. No need for clever solder skills – it really is for the “average” modeller.
Bridge dimensions
75ft (23m) 7mm/ft bridge length = 525mm
bridge track deck width = 47mm
deck width between handrails = 91mm
Pit dimensions
Outer rim = 558mm
hole required = 548mm
pit depth: 31mm at centre, 25mm at edge
Drive train options:
Hand from heaven! The most basic turning is hand from above. 100% foolproof, 100% simple.
MOTOR. The turntable is designed to use a GW370 powerful 12V 0.6rpm/2rpm/3rpm motor with direct drive of primary shaft turning in oil-bearing bronze bushes. The motor is not supplied in the kit, as it is readily available on ebay, priced £10-£15, but the kit does include the motor mount, shaft coupler, and the motor screws. all you need to buy is the motor.
GREENWOOD MODEL RAILWAY PRODUCTS. manual motor. Mike Greenwood now has an adapter plate for Kitwood Hill turntables which allows you to use his turntable drive systems. This is based around a stepper motor and 5 toothed belt reduction. I have the manual control version. it is a quality-built ready-assembled unit and runs really smooth. The manual control version is with simple a push button, and he has an Indexing option too. You will have to order the unit from Mike.
DCC or DC. Like all KHM turntables, this can be used with either system. The track power PCB connection rings are continuous so there are no disconnects to DCC decoders with sound as the bridge turns. The contact plungers are 6A rated quality items from the electronics industry. Polarity can be handled with a DCC reversing module or a simple DPDT switch for DC.
Primary shaft turning plate: the heart of all KHM turntables and now proven design. This is a jig-built, ready-assembled item with the 4mm primary shaft, pinned and epoxied into a milled brass section. She ain’t slipping!!
Assembly and construction:
Bridge is made of laser cut ply of various types and thickness with hardwood decking. Glued together with step by step photo instructions. Not hard. Novices have built my turntables!
Bridge track: the kit is designed for using rail and chairs directly on the bridge. You cannot just slap a bit of flextrack along it (well you could but it would look hideous!). The bridge track and rails are no longer supplied – they are available from any Peco stockist. For UK outline use IL702 O Scale rail chairs and PECO Code 124 track (or the equivalent from C&L). For German locomotives you will need taller “Lenz” code 148 rail and chairs.
Pit is laser cut 3mm and 4mm ply. Because of the weight of locos it is best to support the turntable from below, rather than the rim (unlike other KHM turntables)
While the kit will make up a whole pit with base , because of the size it is very strongly recommended to fix an additional flat, rigid 9mm ply sheet to the underside to maintain rigidity. This isn’t in the kit because that would weigh far too much and be too big to ship!
Circle rail: Code 100 (included) is soldered to PCB sleepers and a simple jig helps you get it circular and set in the right place. All KHM turntables use the method and its well proven over the years. Its simple, even for novice solderers.
bridge wheels: Now 3D printed Nylon with ball-race bearings. They are wide enough to be forgiving of “assembly tolerance” of the ring rail.
Instructions:
These are available as PDFs only, sent at time of shipping. There are no printed instructions in the kit. The instructions are full of photos taking you through the assembly process. If you want to see them before ordering then please just Contact Me. No obligation, electrons are free!
