| SKU | KHM021 |
| Price | £85 |
| Variants | Remove water tower (reduces price by £18) gauge: On30 or On3 roof: shingles or corrugated iron |
Perfect for your On30 or On3 Shays/Climax/Forneys
10 1/2″ long x 5″ wide footprint. Internal length with closed doors is 10″.
The kit It can be made left or right handed.
The lean-to 6ft diameter water tank is included in the kit as standard and can be placed front or back. but it can be removed from the kit as an option.
The wooden walls are full panels rather than individual boards, and planking is cut on both sides which not only means there is detail inside, but it also allows them to be reversible for alternative arrangements.
The office on the side has internal framework, and the office windows and doors have features both sides. Main roof and office roof can be made to lift away, to see detail inside.
-> frames: cut from 2.7mm poplar ply. they include tabs to aid construction.
-> Flooring: this includes a sub-base that will take Peco HO or ME On30 track, and a top floor covering of Obechi laser-cut panels with planks and nail holes. On3 version is available – add note to order if you want On3.
-> 2 Roof apex vents: these are cut from 0.8mm (1/32″) birch microply.
-> On30 engine house stall doors are dedicated to the kit. Made from microply and Obechi – all the grain goes the right way.
-> 6 KHM engine house windows (KHB008)
-> reversible wall panels with engraving both sides, laser cut from premium laser-grade microply
-> side office structure with floor and framing. using premium laser-grade microply.
-> 2 office doors and 4 office windows
-> roof framework from poplar ply and roof panels from 1/16 laserply
-> shingle sheets, or corrugated iron depending on roof option selected.
Kit instructions are emailed in pdf format. there are no printed ones with the kit.
If you wish to add doors into the back wall to make it a “drive thru” house then extra doors can be added – just ask when your order.